HB microtec - stands for High Benefit in "micro" machining technology!

EN

Milling cutter finder

Which cutter fits my machining task?

Select material and geometry to find matching tools and variants.

Operation
Material
Tool design & Dimensions

Choose one or more criteria. Matching cutters will appear here.

Milling

Our standard range offers milling tools for HPC, HSC, plunge, ramp and trochoidal milling as well as for 3D raster machining, roughing, finishing and much more. Our ambition is to create measurable added value for our customers with our tools. The ACTIONMILL® and TARGETMILL® tool lines are convincing examples of our capacity for innovation.

We keep developing these tools further and extend the product lines with additional variants and new designs.

All items

ACTIONMILL INOX-micro Torx
ACTIONMILL INOX-micro Torx

ACTIONMILL INOX-micro Torx

Summary:

  • Multi-flute micro cutters from Ø0.2 mm to Ø1.0 mm
  • Available in 3xD and 5xD neck lengths
  • Suitable for titanium, stainless steel and CoCr alloys
  • Standardized for Torx® types T4 to T30
  • Chromium-free coatings
ACTIONMILL INOX-micro cooled
ACTIONMILL INOX-micro cooled

ACTIONMILL INOX-micro cooled

Summary:

  • Two-flute micro cutters from Ø0.2 mm to Ø2.0 mm
  • Available in 5xD neck length
  • Integrated coolant prevents chip jams
  • Suitable for titanium and stainless steel alloys
  • Chromium-free coatings
TARGETMILL INOX-micro
TARGETMILL INOX-micro

TARGETMILL INOX-micro

Summary:

  • Two-flute micro cutters from Ø0.2 mm to Ø2.0 mm
  • Rigid and short design
  • With sharp corner definition
  • Suitable for titanium and stainless steel alloys
  • Chromium-free coatings
INOX-Groover cooled
INOX-Groover cooled

INOX-Groover cooled

Summary:

  • Three-flute micro cutters from Ø0.7 mm to Ø8.0 mm
  • Plunging, ramping (70°) or vertical (90°) drilling possible
  • Available with 1.5xD and 3xD cutting lengths, with & without integrated coolant
  • Available sharp with small corner chamfers or with corner radii
  • Roughing and finishing with just one tool
  • Suitable for titanium, stainless steel and CoCr alloys
INOX-Groover cooled toric
INOX-Groover cooled toric

INOX-Groover cooled toric

Summary:

  • Three-flute micro cutters from Ø0.7 mm to Ø8.0 mm
  • Plunging, ramping (70°) or vertical (90°) drilling possible
  • Available with 1.5xD and 3xD cutting lengths, with & without integrated coolant
  • Available sharp with small corner chamfers or with corner radii
  • Roughing and finishing with just one tool
  • Suitable for titanium, stainless steel and CoCr alloys
INOX-Groover
INOX-Groover

INOX-Groover

Summary:

  • Three-flute micro cutters from Ø0.7 mm to Ø8.0 mm
  • Plunging, ramping (70°) or vertical (90°) drilling possible
  • Available with 1.5xD and 3xD cutting lengths, with & without integrated coolant
  • Available sharp with small corner chamfers or with corner radii
  • Roughing and finishing with just one tool
  • Suitable for titanium, stainless steel and CoCr alloys
INOX-Groover toric
INOX-Groover toric

INOX-Groover toric

Summary:

  • Three-flute micro cutters from Ø0.7 mm to Ø8.0 mm
  • Plunging, ramping (70°) or vertical (90°) drilling possible
  • Available with 1.5xD and 3xD cutting lengths, with & without integrated coolant
  • Available sharp with small corner chamfers or with corner radii
  • Roughing and finishing with just one tool
  • Suitable for titanium, stainless steel and CoCr alloys
ACTIONMILL INOX-Torus cooled
ACTIONMILL INOX-Torus cooled

ACTIONMILL INOX-Torus cooled

Summary:

  • Four-flute micro cutters from Ø1.0 mm to Ø6.35 mm
  • Integrated coolant prevents chip jams
  • Torus cutter with corner radii
  • Suitable for titanium and stainless steel alloys
  • Chromium-free coatings
ACTIONMILL micro INOX Ball cooled
ACTIONMILL micro INOX Ball cooled

ACTIONMILL micro INOX Ball cooled

Summary:

  • Two-flute micro full-radius cutters from Ø0.2 mm to Ø1.0 mm
  • Available in 3xD and 5xD neck lengths
  • Integrated coolant prevents chip jams
  • Suitable for titanium and stainless steel alloys
  • Chromium-free coatings
ACTIONMILL INOX-Ball Z3 cooled
ACTIONMILL INOX-Ball Z3 cooled

ACTIONMILL INOX-Ball Z3 cooled

Summary:

  • Three-flute micro full-radius cutters from Ø1.0 mm to Ø6.0 mm
  • Short and rigid design enables high cutting speeds
  • Integrated coolant prevents chip jams, also available without internal coolant
  • Suitable for titanium and stainless steel alloys as well as non-ferrous metals
  • Two different coatings available
ACTIONMILL INOX-Ball Z3
ACTIONMILL INOX-Ball Z3

ACTIONMILL INOX-Ball Z3

Summary:

  • Three-flute micro full-radius cutters from Ø1.0 mm to Ø6.0 mm
  • Short and rigid design enables high cutting speeds
  • Integrated coolant prevents chip jams, also available without internal coolant
  • Suitable for titanium and stainless steel alloys as well as non-ferrous metals
  • Two different coatings available
ACTIONMILL INOX-Ball cooled
ACTIONMILL INOX-Ball cooled

ACTIONMILL INOX-Ball cooled

Summary:

  • Four-flute micro full-radius cutters from Ø1.0 mm to Ø8.0 mm
  • Available in 3xD and 5xD neck lengths
  • Integrated coolant prevents chip jams
  • Suitable for titanium and stainless steel alloys as well as non-ferrous metals
  • Chromium-free coatings
ACTIONMILL INOX-Ball Z4
ACTIONMILL INOX-Ball Z4

ACTIONMILL INOX-Ball Z4

Summary:

  • Four-flute micro full-radius cutters from Ø1.0 mm to Ø8.0 mm
  • Available in 3xD and 5xD neck lengths
  • Short and rigid design enables high cutting speeds
  • Suitable for titanium and stainless steel alloys as well as non-ferrous metals
  • Chromium-free coatings
ACTIONMILL INOX Lollipop-Z4 260° with integrated cooling
ACTIONMILL INOX Lollipop-Z4 260° with integrated cooling

ACTIONMILL INOX Lollipop-Z4 260° with integrated cooling

Summary:

  • Four-flute micro lollipop cutters with 260° from Ø1.0 mm to Ø10.0 mm
  • The 260° cutting-edge wrap enables undercuts
  • Available in 4xD neck length, with & without integrated coolant
  • Five-axis milling of freeform surfaces
  • Deburring and line milling with one tool
  • Suitable for titanium, stainless steel and CoCr alloys
ACTIONMILL INOX Lollipop-Z4 260° without cooling
ACTIONMILL INOX Lollipop-Z4 260° without cooling

ACTIONMILL INOX Lollipop-Z4 260° without cooling

Summary:

  • Four-flute micro lollipop cutters with 260° from Ø1.0 mm to Ø10.0 mm
  • The 260° cutting-edge wrap enables undercuts
  • Available in 4xD neck length, with & without integrated coolant
  • Five-axis milling of freeform surfaces
  • Deburring and line milling with one tool
  • Suitable for titanium, stainless steel and CoCr alloys
ACTIONMILL Lollipop 305°
ACTIONMILL Lollipop 305°

ACTIONMILL Lollipop 305°

Summary:

  • Micro lollipop cutters from Ø0.8 mm to Ø10.0 mm
  • 305° cutting-edge wrap enables 5-axis milling
  • Milling (deburring) of demanding and complex contours
  • Deburring, chamfering or line milling with one tool
  • No secondary burrs thanks to the 3 teeth
  • Available with two coatings
  • Universally applicable
ACTIONMILL INOX-CORD cooled
ACTIONMILL INOX-CORD cooled

ACTIONMILL INOX-CORD cooled

Summary:

  • Four-flute HPC cord cutters from Ø4.0 mm to Ø12.0 mm
  • Roughing of demanding materials such as CoCr or INOX
  • Corner radii stabilize the roughing cutter
  • Shorter process times and high process reliability
  • Integrated Y-coolant delivers high performance, also available without internal coolant
  • Suitable for titanium, stainless steel and steel alloys
ACTIONMILL INOX-CORD
ACTIONMILL INOX-CORD

ACTIONMILL INOX-CORD

Summary:

  • Four-flute HPC cord cutters from Ø4.0 mm to Ø12.0 mm
  • Roughing of demanding materials such as CoCr or INOX
  • Corner radii stabilize the roughing cutter
  • Shorter process times and high process reliability
  • Integrated Y-coolant delivers high performance, also available without internal coolant
  • Suitable for titanium, stainless steel and steel alloys
ACTIONMILL INOX-HPC cooled
ACTIONMILL INOX-HPC cooled

ACTIONMILL INOX-HPC cooled

Summary:

  • Four-flute HPC cutters from Ø4.0 mm to Ø12.0 mm
  • Roughing of demanding materials such as CoCr or INOX
  • Corner radii stabilize the roughing cutter
  • Shorter process times and high process reliability
  • Integrated Y-coolant delivers high performance, also available without internal coolant
  • Suitable for titanium, stainless steel and steel alloys
ACTIONMILL INOX-HPC
ACTIONMILL INOX-HPC

ACTIONMILL INOX-HPC

Summary:

  • Four-flute HPC cutters from Ø4.0 mm to Ø12.0 mm
  • Roughing of demanding materials such as CoCr or INOX
  • Corner radii stabilize the roughing cutter
  • Shorter process times and high process reliability
  • Integrated Y-coolant delivers high performance, also available without internal coolant
  • Suitable for titanium, stainless steel and steel alloys
ACTIONMILL Finish cooled
ACTIONMILL Finish cooled

ACTIONMILL Finish cooled

Summary:

  • Six-flute HSC finishing cutters from Ø3.0 mm to Ø16.0 mm
  • Finishing of demanding materials such as titanium or INOX
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch
  • Protected and sharp cutter corner
  • Available with or without integrated Y-coolant
ACTIONMILL Finish
ACTIONMILL Finish

ACTIONMILL Finish

Summary:

  • Six-flute HSC finishing cutters from Ø3.0 mm to Ø16.0 mm
  • Finishing of demanding materials such as titanium or INOX
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch
  • Protected and sharp cutter corner
  • Available with or without integrated Y-coolant
ACTIONMILL Trochoid cooled
ACTIONMILL Trochoid cooled

ACTIONMILL Trochoid cooled

Summary:

  • Six-flute TSC cutters from Ø3.0 mm to Ø16.0 mm
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch & special cutting-edge design for vibration damping
  • Available with corner radii and with a sharp cutter corner
  • Available with or without integrated Y-coolant
ACTIONMILL Trochoid
ACTIONMILL Trochoid

ACTIONMILL Trochoid

Summary:

  • Six-flute TSC cutters from Ø3.0 mm to Ø16.0 mm
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch & special cutting-edge design for vibration damping
  • Available with corner radii and with a sharp cutter corner
  • Available with or without integrated Y-coolant
ACTIONMILL Trochoid cooled torus (with corner radius)
ACTIONMILL Trochoid cooled torus (with corner radius)

ACTIONMILL Trochoid cooled torus (with corner radius)

Summary:

  • Six-flute TSC cutters from Ø3.0 mm to Ø16.0 mm
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch & special cutting-edge design for vibration damping
  • Available with corner radii and with a sharp cutter corner
  • Available with or without integrated Y-coolant
ACTIONMILL Trochoid torus (with corner radius)
ACTIONMILL Trochoid torus (with corner radius)

ACTIONMILL Trochoid torus (with corner radius)

Summary:

  • Six-flute TSC cutters from Ø3.0 mm to Ø16.0 mm
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch & special cutting-edge design for vibration damping
  • Available with corner radii and with a sharp cutter corner
  • Available with or without integrated Y-coolant
ACTIONMILL GRIZZLY Groover
ACTIONMILL GRIZZLY Groover

ACTIONMILL GRIZZLY Groover

Summary:

  • Four-flute HPC cutters from Ø4.0 mm to Ø16.0 mm
  • Ramping up to 45° possible
  • Corner radii stabilize the roughing cutter
  • Shorter process times and high process reliability
  • Universally applicable
ACTIONMILL TRIPLE FUNCTION
ACTIONMILL TRIPLE FUNCTION

ACTIONMILL TRIPLE FUNCTION

Summary:

  • Multifunctional milling tools, semi-standardized
  • Roughing, finishing + chamfering with one tool
  • Shorter process times and higher process reliability
  • Triple milling function
  • Available from Ø3 to Ø16 mm

Finish XL & XXL

Summary:

  • Six-flute HSC finishing cutters from Ø3.0 mm to Ø16.0 mm
  • Finishing of demanding materials such as titanium or INOX
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch
  • Protected and sharp cutter corner
  • Available with or without integrated Y-coolant

Trochoid XL & XXL

Summary:

  • Six-flute TSC cutters from Ø3.0 mm to Ø16.0 mm
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch & special cutting-edge design for vibration damping
  • Available with corner radii and with a sharp cutter corner
  • Available with or without integrated Y-coolant

Trochoid XL & XXL toric

Summary:

  • Six-flute TSC cutters from Ø3.0 mm to Ø16.0 mm
  • Available with 2xD; 3xD; 4xD & 5xD cutting lengths
  • Vibration-free machining thanks to unequal pitch & special cutting-edge design for vibration damping
  • Available with corner radii and with a sharp cutter corner
  • Available with or without integrated Y-coolant

HPC / HSC / TSC cutters

The HB microtec® ACTIONMILL® INOX-CORD / -HPC / -Finish / -Trochoid cutters are perfectly matched to their respective tasks.

Thanks to their geometries with internal cooling, all four cutter types are suitable for every titanium and stainless steel alloy. The cutters stand out for the above-average tool life they offer you.

T-Slot cooled
T-Slot cooled

T-Slot cooled

Summary:

  • Quickly available, semi-standardized T-slot cutter
  • Quick and easy to configure
  • Available with or without internal coolant
  • Customized to your requirements
  • Also specialized for hard-to-machine materials
T-Slot
T-Slot

T-Slot

Summary:

  • Quickly available, semi-standardized T-slot cutter
  • Quick and easy to configure
  • Available with or without internal coolant
  • Customized to your requirements
  • Also specialized for hard-to-machine materials
T-Slot
T-Slot

T-Slot

Summary:

  • Quickly available, semi-standardized T-slot cutter
  • Quick and easy to configure
  • Available with or without internal coolant
  • Customized to your requirements
  • Also specialized for hard-to-machine materials
ACTIONMILL External Starlobe (Torx® Cutter)
ACTIONMILL External Starlobe (Torx® Cutter)

ACTIONMILL External Starlobe (Torx® Cutter)

Summary:

  • Quickly available, semi-standardized Torx profile cutter
  • Quick and easy to configure
  • Available with or without internal coolant
  • Customized to your requirements
  • Also specialized for hard-to-machine materials

Torx drilling and milling

For driving screws, medical technology in particular — surgery and dentistry — uses screws and drivers with a star-shaped drive profile featuring six rounded lobes.

Designated as a hexalobular internal or external drive in accordance with ISO 10664, the profile is commonly known by the brand name TORX®.

T-Slot

Thanks to its performance and versatility, the HB microtec® “T-slot cutter” ACTIONMILL® TSLOT is exactly the right all-purpose tool for producing T-slots.

The ACTIONMILL® T-SLOT stands out for its outstanding tool life and above-average cutting data. The welcome side effect for you: shorter throughput times and no more tiresome tool changes.

INOX cutters

The new complete INOX cutter catalog shows HB microtec’s dedication to precision and its passion for milling.

With a pronounced passion for machining technology and a consistent focus on the customer, HB microtec clearly sets itself apart from other suppliers. That passion shows in services close to the customer: HB microtec advises customers and users on the entire manufacturing process in practical terms.

All our INOX cutter innovations now in a single catalog!

Cutting Tools 2026

As machining specialists, we repeatedly present pioneering manufacturing processes and tools whenever components have to be produced from hard, heat-resistant and abrasive materials such as cobalt-chrome, nickel and titanium alloys.
Our new standard tools make this considerably more economical and more reliable than before. Customers can rely on our outstanding expertise.

ACTIONMILL Lollipops

Our ACTIONMILL Lollipop range comprises the INOX-Lollipop and Titan-Lollipop deburring cutters as well as the Lollipop-Z4 260° and Lollipop-Z4 260° cooled full-radius cutters.

Thread drilling & milling

The HB microtec range of tapping drills offers the right tool for every drilling operation.

From M1 to M8 for every thread variant: thread mills, thread formers, thread whirlers and more. The complete range comes from a single source: ACTIONDRILL and TARGETDRILL cover every diameter, every depth and every material. Each of these tools is designed to save you process time, improve surface finish and increase process reliability — especially with difficult-to-machine materials such as titanium alloys or stainless steel alloys (INOX) in micro machining.

At HB microtec, thread whirlers from M1 with five teeth and integrated cooling are now also available as standard. A particular highlight: the new thread drill mills from M2, available with or without integrated cooling.

Your contacts

Ralf Malinger
Technical Sales Consultant

+49 7461 1657280
+ 49 151 17936942
kontakt@hb-microtec.de
Ralf Malinger

Your contacts

Marcel Kuchelmeister
Technical Director (CTO)

+49 7461 1657284
+ 49 151 55694458
kontakt@hb-microtec.de
Marcel Kuchelmeister

Your contacts

Arnold Nikesch
Head of Logistics; Inside Sales

+49 7461 1657280
+ 49 151 72835677
kontakt@hb-microtec.de
Arnold Nikesch

Your contacts

Ing. (FH)

Robert Bede
CEO / Managing Director

+49 7461 1657280
kontakt@hb-microtec.de
Robert Bede

HB microtec GmbH & Co. KG
Bischof-Sproll-Straße 6
DE-78532 Tuttlingen

+49 7461 1657280
 +49 7461 1657281
 kontakt@hb-microtec.de
built by Taub Digital